|
|
 |
 |
 |
| 复舜照明-Lithonia照明 |
| 安全可靠，维护方便，最合理的性价比是我们的承诺 |
|
| |
| Lithonia照明系列 |
|
型号：9000 |
  |
型号：kps |
 |
 |
Features
6-Inch Optical System:
Microgroove matte-black baffle provides extreme low brightness at high aiming angles.
Up/Down Optical System: Self-flanged, specular clear, semi-diffuse or highly specular anodized cone or microgroove baffle maximizes lamp output while minimizing high-angle brightness.
Housing: Hydroformed aluminum housing with integral microgroove baffle (6"). Heavy-gauge aluminum housing rolled and welded with no visible seam (7").
Electrical System: Extruded aluminum, heat-dissipating socket housing with heavy-duty porcelain socket. Mounting: Ceiling mount (standard on 6' units), wall mount or pendant mount available.
Listing: Fixtures are UL 1571 listed for insulated ceilings and damp locations. Listed and labeled to comply with Canadian Standards. |
 |
Parking Garage Lighting
KPS
Features Housing: Rugged, heavy-gauge, aluminum housing. Square shape, continuous welded seams for weather-tight integrity. Extrudedaluminum door frame has an impact-resistant, tempered glass lens. Door frame is sealed to housing by EPDM closed-cell gasket. Direct mounting to recessed J-box is standard; yoke or recessed mountings optional. Housing will accommodate both top and side branch-circuit wiring and has internal splice compartment Dark bronze polyester powder finish (DDB) standard; other architectural colors available. Stainless steel housing also available.
Optics: Reflectors are anodized, hydroformed aluminum. Four IES cutoff distributions available: Type II (Roadway), Type III (Asymmetric), Type IV (Forward Throw) and Type V (Symmetric). Type V reflector is vertically lamped, all others horizontally lamped. Reflectors are field-interchangeable and hinge out for easy removal during installation/ maintenance.
Ballast/Electrical System: All ballasts are copper wound and 100% factory tested. Electrical components are unitized on removable power module. Positive-locking, quick-disconnect on primary and secondary circuits. Medium-base porcelain socket standard. Mogul-base porcelain socket required for 175W metal halide. 4KV pulse rated.
Listings: UL listed for damp location. SS: UL listed for 25 C ambient and damp location (wet location optional). RMG: UL listed for recessed, wet location and covered ceilings only. Listed and labeled to comply with Canadian Standards (see Options). |
 |
Decorative Wall-Paks
WG/WP
Features
Housing: Die-cast aluminum housing with electrostatically applied dark bronze polyester powder finish. White finish available.
|
|
|
